The Järven Series is one of our most popular houses. The reason is the attractive exterior look with a practical interior design using every square metre to the maximum.
|
|
| Delivery Description for Tallhus & Järven Series |
| Foundations |
Doors |
| Available for plinth, pile, screw, trench or slab foundations |
Entrance door with handle and cylinder lock, double glazed light, frame & metal sill. Interior doors in untreated rustic pine. |
| Floor |
Porch & Verandah |
Damp proof course,Trimmer 90x145 mm, 45x200 mm masonite joists and 25x100 mm ledgers. Subfloor in cut to width sheets with 195 mm mineral wool board insulation. 25x135 mm pine kiln dried floorboards for main room (supplied in protective packaging until required) 22 mm particleboard for remaining rooms.
Loft in Järven with 25x135 mm pine kiln dried floorboards.
Solid floor option available. |
2 supporting & 2 decorative pillars, 45x145 mm joists with 28x95 mm impregnated flooring. 58x136 mm planed tongue and groove profile railings continous with walls. 34 x115 mm handrails. 2 benches.
Trimmer for verandah 90x145 mm, joists 45x145 mm, ledger 34x45 mm, impregnated flooring 28x95 mm |
| Walls |
Stairs (Järven) |
Cross-corner jointed Northern Scandinavian pine 58x136 mm planed tongue and groove profiled timber, fully marked and ready for assembly.45x20 mmstudwork, mineral wool board 120 mm, 0.2mm weatherproof membrane on exterior walls. 22x136 mm timber panelling for main room, 10 mm particleboard elsewhere.
For Järven 22x136 mm timber panelling for loft. Partition walls 45x45 mm and/or 45x70 mm studs with 10 mm particle board on both sides.
Ventilation grills in gables.
partitiom walls 45x45mm and or45x70mm studs with 10mm particle board on both side. Ventilation grills on gables |
Alternating tread loft ladder with integral banister and railing. Varnished pine . |
| Sauna ( where included) |
| Insulation to walls (45 mm) 0.2 mm moisture barrier and 15 mm whitewood cladding on walls. Floor 22 mm particleboard. 2 benches, door with handle. |
| Roof |
Drawings |
70x200 mm purlins with 34x95 mm rafters and 17 mm tongue and groove rough sawn sheathing, covered with waterproof felt.
Dimensioned for snowzone 3 – higher loadings available on request.
Drainage - Plastic Coated Metal |
Every delivery includes a main drawing, foundation drawing assembly drawing and instructions. Approval drawings available beforehand where necessary. Variation drawings to be charged separately |
| Ceiling |
Options |
Supporting framwork, mineral wool 120 + 95 mm, 0.2 mm weatherproof membrane and 15 mm planed profiled cladding.
For Järven 180 mm round supports for ceiling in main room with 34x120 mm joists. |
Shutters (untreated), windows prepainted, 22 mm panelling or 113mm gypsum-board in place of 10 mm particleboard. Extra insulation on wall (45 mm) and ceiling (120 mm) |
| Finishing |
Windows & French Doors |
Triple barge boards comprising 2x22x140 mm and 1x22x170 mm, 22 x145 mm fascia board and sawn decoration for mounting under lower barge board. External lining for door and windows 22x120 mm, interior 34 x110 mm with 21x75 mm lining, Rustic skirting 19x95 mm, cornice 22x54 mm. |
Windows with fixed and opening lights, French doors, triple glazed. Removable glazing bars. Handles & stays. Frames with metal sills. |
| Extras |
Electical and plumbing work not included. Different floorcoverings on request.
Nails not included.
We reserve the right to make subsitutions of similar or better quality in all deliveries without prior notification, including in the instructions and delivery descriptions, without affecting the overall suitability. |
|